Keysight Enables Engineers to Verify, Debug CAN XL and Other Automotive Protocols | Your money

SANTA ROSA, Calif.–(BUSINESS WIRE)–April 21, 2022–

Keysight Technologies, Inc. (NYSE: KEYS), a leading technology company that provides advanced design and validation solutions to help accelerate innovation to connect and secure the world, has launched the first trigger/decode solution automotive protocol based on an oscilloscope ( D9010AUTP ) covering CAN XL (Controller Area Network eXtra Long) which allows engineers to verify and debug low-speed automotive serial bus protocols and simplify system development and troubleshooting, including CAN/CAN FD (Flexible Data Rate) and CAN XL.

This press release is multimedia. See the full version here: https://www.businesswire.com/news/home/20220421005751/en/

Keysight’s D9010AUTP decodes the SIC mode and fast mode signal generated by the SIC XL CAN transceiver. (Graphic: Business Wire)

CAN XL is the third-generation CAN standard in development by the CAN in Automation (CiA) group that enhances the well-established CAN FD protocol with increased data payload and faster bit rate. CAN XL data phase speed is specified to be 10 Mbps or more, depending on transceiver capabilities and physical layer components. CAN XL has two modes of operation – fast mode and SIC mode (or slow mode).

Keysight’s automotive decoder software correctly triggers and decodes the SIC mode signal in the Arbitration phase, as well as the Fast mode signal in the Data phase. It also supports CAN XL protocols implemented with CAN HS/FD/SIC transceivers.

“In-vehicle networking technologies play a central role in the fast and reliable transmission of data from sensors to AI decision-making units, as well as between safety-relevant electronic control units and electronic systems in the car. said Thomas Goetzl, vice president and general manager of Keysight’s Automotive and Energy Solutions business unit. “The variety of automotive serial bus standards reflects the diverse needs and requirements of the automotive industry, and Keysight is excited to continue to provide industry-leading solution offerings that support additional capabilities and use cases.”

Keysight’s D9010AUTP software is compatible with Keysight Infiniium Oscilloscopes using software version 11.30 or higher for MXR/EXR/UXR models and software version 6.72 or higher for other Infiniium scope models allowing users to:

  • Configure the oscilloscope to display CAN, LIN, CAN FD, CAN XL, FlexRay and SENT protocol decoding in less than 30 seconds
  • Access a rich set of built-in protocol-level triggers
  • Save time and eliminate errors by viewing packets at the protocol level
  • Use time-correlated views to quickly troubleshoot serial protocol issues until they’re in sync or the root cause of signal integrity

Additional information on Keysight’s automotive protocol trigger and decode software can be found at the Keysight D9010AUTP data sheet.

About Keysight Technologies

Keysight provides advanced design and validation solutions that help accelerate innovation to connect and secure the world. Keysight’s commitment to speed and accuracy extends to software insights and analytics that bring tomorrow’s technology products to market faster throughout the development lifecycle, in design simulation, validation prototypes, automated software testing, manufacturing analysis, and network performance optimization and visibility across the enterprise. service provider and cloud environments. Our customers span global markets in communications and industrial ecosystems, aerospace and defense, automotive, energy, semiconductors and general electronics. Keysight generated $4.9 billion in revenue in fiscal 2021. For more information about Keysight Technologies (NYSE: KEYS), visit us at www.keysight.com.

Additional information about Keysight Technologies is available in the press room at https://www.keysight.com/go/news and on Facebook, LinkedIn, Twitter and Youtube.

Show source version on businesswire.com:https://www.businesswire.com/news/home/20220421005751/en/

CONTACT: KEYSIGHT TECHNOLOGIES CONTACTS: Geri Lynne LaCombe, Americas/Europe

+1 303 662 4748

geri—[email protected] Dohi, Asia

+81 42 660-2162

fusako—[email protected]

KEYWORD: CALIFORNIA UNITED STATES NORTH AMERICA

INDUSTRY KEYWORD: SOFTWARE MOBILE/WIRELESS NETWORKING INTERNET HARDWARE DATA MANAGEMENT TECHNOLOGY OTHER MANUFACTURING SEMICONDUCTORS SATELLITE ENGINEERING AUTOMOTIVE MANUFACTURING MANUFACTURING

SOURCE: Keysight Technologies, Inc.

Copyright BusinessWire 2022.

PUBLISHED: 04/21/2022 11:00 a.m. / DISK: 04/21/2022 11:02 a.m.

http://www.businesswire.com/news/home/20220421005751/en

Copyright BusinessWire 2022.



Source link